IS66066 Is a high power density, high frequency, fully integrated synchronous step-down converter. With a 3mm x 4mm 21 PIN QFN package. It can support a continuous output current of up to 12A. It has a very high working efficiency in the output load current range, and it has a good load adjustment rate and linear adjustment rate in the wide input voltage range.

IS66066 Adopt the internal compensation mode, and use the unique TCOT^TMControl mode to provide fast transient responses and simplified loop compensation networks. The switching frequency can be selected between 600 kHz, 800 kHz and 1 MHz. The soft start time can be set by the external capacitor. The PGOOD signal is provided to indicate the working state of the chip.

Product Parameter

Input voltage: 4.8V ~16V

Output voltage: 0.6V ~ 5.5V

Switch frequency: 600 kHz, 800 kHz, 1 MHz

Output current: 12A

Efficiency:> 90%

● put to use TCOT^TMControl mode, with a fast, transient response

● 2.4V minimum start input voltage VIN (using external VCC)

● Continuous output current of  12A

● Distal differential detection

● 1 μ A Typical static current (IQ)

● 90% maximum duty ratio

● Load adjustment rate and linear adjustment rate of 0.5% voltage accuracy

● The efficiency of the load range can reach more than 90%

● Skip mode or CCM mode

● Soft start time is programmable

● Optional 600 kHz, 800 kHz, 1 MHz switch frequency

● Over-current protection (OCP), negative over-current protection (NOCP), over-voltage protection (OVP), undervoltage locking (UVLO) and overtemperature protection (OTP)