IS6630C， A complete power supply solution with high power density for LP DDR 5, integrated with a synchronous step-down switch converter (VDD 2), which provides continuous current of up to 10A over a wide input voltage (4.5 V to 22 V), with excellent load and linear adjustment rate. It uses the TCOT patented by the company^TMControl mode, can achieve rapid transient response.

 At the same time, the chip is also integrated with VDDQ LDO, VDD1 LDO. VDDQ LDO The output needs only one 22 uF ceramic capacitor to absorb or provide a continuous current of 1.5A; the VDD1 LDO output requires two 22 uF ceramic capacitors to provide a continuous current of 1.5A.

IS6630C， QFN16 (3mmx3mm) package with fully integrated protection functions, including OCP, NOCP, OVP, UVP and OTP. The PGOOD signal is used to indicate the operating state of the chip. The output end adopts pure ceramic capacitors, which can achieve the purpose of saving space and cost for users.

Product Parameter:

Input voltage range: 4.5V ~22V

Output voltage range: 0.6V~3.3V

Maximum output current: 10A

Switch frequency: 500 KHz, 700 KHz

Efficiency: up to 92% at VIN=12V,VOUT=1.2V

●Integrated power supply solution design for LPDDR5 power supply

●Fully integrated VDDQ (LDO), VDD 1 (LDO), VDD 2 (BUCK) power channel

●Put to use TCOT^TMControl mode to achieve a rapid and transient response

●Continuous output current of 10A

●Excellent load adjustment rate and linear adjustment rate, with an accuracy of 1%

●The efficiency of the load range can reach more than 92%

●Internal integration of OCP, NOCP, OVP, UVLO and OTP